| Finish: |
Gloss Carbon |
| Sizes: |
Mens 29 x M (16.5),L (18.5),XL (20.5) |
| Frame: |
Felt NINE Carbon XC series UHC Advanced carbon fiber, Modular Monocoque Construction: 1 Piece Full carbon dropouts, Hi clearance seat and chainstay yokes. Dingle guard Replaceable Kevlar. Down Tube protector. Bolt on Kevlar chain watcher. Integrated headset, Disc specific, Replaceable Derailleur Hanger, |
| Shock: |
N/A |
| Fork: |
Rockshox Reba RLT 29 80mm travel: Dual Air Spring, with External Rebound Adjust, Disc Brake Specific Lower Legs |
| Headset: |
Fully Integrated 1-1/8 Aheadset: Cane Creek Type 45 Degree Sealed Cartridge Bearing, with Felt Tornado Alloy Top Cap, Custom Curved 1 x 15mm + 2 x 5mm Straight Washers |
| Stem: |
Felt MTB oversized 3D-Forged Design: 4-Bolt Handlebar Clamp, with Hole in Front Clamp, 1-1/8 Threadless, for 31.8mm Handlebar, 7 Degree Rise, with CP Cromo hardware; Sizes M= 90mm, L=100mm, XL= 110mm
|
| Handlebar: |
FELT Devox RXC Carbon UHC Nano Handlebar: 31.8mm clamp diameter, 30mm Rise 8 Degree Rear Sweep, 4 Degree Up Sweep, Width: 640mm |
| Grips: |
Felt dual-density wing grips: Kraton rubber base, Pruven rubber center, Color matched |
| Bar Ends: |
Felt Wing Icon end plugs |
| Shifters: |
Sram X-O 10 speed: trigger shifters |
| Front Derailleur: |
Sram X-O 10 speed |
| Rear Derailleur: |
Sram X-O 10 speed with Carbon Cage |
| Crankset: |
Sram X-O 2 x 10 GXP 10 speed: with allloy 26/39 rings, Lengths: S=170mm; M/L/XL=175mm |
| Chainwheel |
n/a |
| Chainguide: |
n/a |
| Bottom Bracket: |
With crankset |
| Pedals: |
n/a |
| Chain: |
Sram PC-1070 Super-Narrow for 10-speed |
| Freewheel: |
Sram PG-1070 10 speed 11-36T |
| Brake Levers: |
Sram X-O |
| Brakes: |
Sram X-O Hydraulic Disc Brake: Rotors: 160mm Front and Rear |
| Cables: |
Custom Felt Cable Set: Featuring Stamped Felt Logos & FELT Rubber 2-Tone Tube Tops at Head Tube and one Alloy CNC Alloy ferrule at RD, Brake hose supplied with Brakeset |
| Saddle: |
Felt Mountain Design,: Low Side Profile Look with Performance fit Top, double-Density Base, Ni-Ti Rails |
| Seat Post: |
Felt Carbon Post with Twin Clamp Design: Micro-Adjust, 6061 Alloy, Low-Profile Forged Head & Extruded Rail Clamps, 350mm |
| Seat Post Clamp: |
Felt Bolt-Type: Cold Forged + CNC, 6061 Aluminum, with Steel Barrel Nut Design, 34.9mm |
| Rims: |
Mavic Crossmax 29 Wheelset: Maxtal 19mm rims with ISM milling, oversize aluminum hubs with Aluminum Axles 24 Spokes front and rear and Integrated M7 aluminum nipples
|
| Front Hub: |
with Wheelset |
| Rear Hub: |
with Wheelset |
| Spokes: |
with Wheelset |
| Tires: |
WTB Vulpine: Dual DNA Compound,29 x 2.1 120tpi Casing, Aramid Bead with Presta valve Tubes |
| Fenders: |
N/A |
| Kickstand: |
N/A |
| Accessories: |
N/A |
